The Screenpod PV300D is a compact, yet powerful self-contained industrial vacuum with a vast range of attachments, that’s fully mobile and capable of handling a huge variety of different materials in sizes ranging from fine dust to large debris, in both indoor and outdoor applications, with its own high capacity, integrated skip for material collection that’s easily emptied via the use of a forklift.

PORTAVAC PV300D

Can handle huge variety of different materials in vast range of applications
Dual power, with option to run from either onboard genset or external supply
18.4kW (25 HP) EU Stage V / EPA Tier 4 Final Caterpillar Engine
Large capacity fuel tank with easily accessible fuel filler cap and level gauge
Fuel efficient diesel engine with no after treatment and no AdBlue required
Integrated plug for connection to standard 32 Amp 3-Phase Power Supply
Powerful blower fan providing long range suction with high capacity
Can vacuum material ranging from fine dust up to debris 40mm in size
Integrated skip with large capacity for material collection
Skip has built-in tipping mechanism for easy material discharge
Raise/Lower mechanism for effortless skip removal and installation
User friendly interface for simple operation & emergency stop for shut down
Air filtration system that removes 99.7% of airborne particulate matter
Easily replaceable Bag & HEPA filter elements
Wide range of attachments with different hose sizes available
Long, flexible hoses provide reach for hard to access areas
Low operating costs with minimal maintenance requirements
Compact footprint with low noise emissions that’s easily transported
Access doors and removable panels for service access
Suitable for indoor and outdoor applications

Benefits:

Hugely reduces risks associated with dust exposure to employees
Dust is self-contained within the unit so does not become an airborne hazard
Lowers build-up of dust and debris on equipment, lessening breakdowns
Ensures a much tidier workplace with less visible dust and debris around site
Significantly faster and much more effective than manual clean up methods
Makes general housekeeping simpler, quicker and much less labour intensive
Reduced clean up and maintenance costs
Clean up areas inaccessible or hard to reach with conventional methods
Handles much larger material than a conventional vacuum
Material normally disposed can be extracted quickly and recycled
Incredibly easy to empty with minimal manual involvement required
Fully mobile and self-contained, offering a clean-up solution at any location

Clean-Up Applications Include:

Wood Recycling & Timber Production
Construction & Demolition Waste Processing
Quarries & Aggregate Production
Cement & Concrete Production
Pharmaceutical and Food Processing
Brick, Block & Tile Production Plants
Glass Recycling and Production Plants
Lime & Gypsum Production
Grain Processors and Agricultural Operations
Recycling Yards
Mining Operations
Demolitions Sites
Ship Unloading & Ports
Steel Mills & Foundries
Asphalt Production Plants
Pulp & Paper Mills
Fertiliser Production Plants
Power Station Maintenance

How it Works:

The machine consists of 2 sections, the main body and the skip, otherwise known as the ‘drop hopper’.
The drop hopper sits tight to the main body, creating an airtight seal.
The main body contains a powerful blower fan which, during operation, creates a vacuum within the drop hopper.
A hose is connected to the main body via a coupling on the front. The hose can be fitted with various attachments for catching dust & debris, similar to a conventional vacuum cleaner.
The vacuum produced within the drop hopper generates a suction through the connected hose, allowing any dirt & debris to be sucked up through it.
As the material is sucked into the machine, it falls into the drop hopper. During operation, material will continue to collect here until the hopper is full.
Any airborne dust will be captured by the incorporated air filtration system.
Once full, the hopper can be emptied by simply removing it from the machine and tipping out the material within it via the in-built tipping mechanism.
It can then be refitted, and the machine is ready to go again.